Product Price :Get Latest Price
Product Details:Softening Point | 110 Degree C - 125 Degree C |
Moisture Content | 0.5 % Max |
Chemical Classification | PTBP Formaldehyde Resin (Resole) |
Colour | Pale Yellow |
Methylol Content | 8-13 % |
Type | Heat Reactive/Adhesive Resin |
Physical Form | Broken Lumps |
Product Price :Get Latest Price
Product Details:Chemical Classification | PTBP Formaldehyde Resin (Resole) |
PTBP Formaldehyde Resin (Resole) | Broken Lumps |
Broken Lumps | 95 Degree C - 110 Degree C |
Methylol Content | 10-14 % |
Moisture Content | 0.5% Max |
Type | Heat Reactive/Adhesive Resin |
Colour | Pale Yellow |
Viscosity of 60% solution in Toluene at 25º C by B 4 Ford Cup is 35 - 70 sec.
Application
POLYTONE AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
Use of POLYTONE AP 109 imparts good open time combined with excellent green tack and cohesive strength in rubber based adhesives. Use of POLYTONE AP 109 is also useful for increasing the storage stability and heat resistance of the adhesive.
Solubility
POLYTONE AP 109 is soluble in aromatic hydrocarbon solvents, chlorinated hydrocarbons, ketones and esters etc.
Packaging
Available in 25 Kg bags.
Shelf Life
Store under cool dry conditions . It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However, as use conditions are not within our control no guarantees are given or are to be inferred, nor is freedom from any patent to be inferred.
Product Price :Get Latest Price
Product Details:Melting Point (Capillary) | 70 Degree C - 80 Degree C |
Methylol Content | 14-18 % |
Moisture Content | 0.5% Max |
Chemical Classification | PTBP Formaldehyde Resin (Resole) |
Colour | Pale Yellow |
Type | Heat Reactive/Adhesive Resin |
Physical Form | Broken Lumps |
Application
POLYTONE AP 111 is a heat reactive alkyl Phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type. AP 111 can also be used with the adhesive grades of chloroprene where good bond strength at room and elevated temperatures are required.
Up gradation of Neoprene and adhesive grades of Chloroprene rubber used in rubber based adhesives.
Solubility
POLYTONE AP 111 is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon.
Packaging
Available in 25 Kg bags.
Shelf Life
Store under cool dry conditions. It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However , as use conditions are not within our control no guarantees are given or are to be inferred , nor is freedom from any patent to be inferred .
Additional Information:
Product Price :Get Latest Price
Product Details:Melting Point (Capillary) | 60 Degree C - 70 Degree C |
Softening Point (B & R) | 83 Degree C - 95 Degree C |
Methylol Content | 10-13 % |
Moisture Content | 0.5% Max |
Chemical Classification | PTBP Formaldehyde Resin (Resole) |
Colour | Pale Yellow |
Type | Heat Reactive/Adhesive Resin |
Physical Form | Broken Lumps |
Application
POLYTONE AP 112 is a heat reactive alkyl phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.
POLYTONE AP 112 can also be used with the adhesive grades of chloroprene where good bond strength at room and elevated temperatures are required.
Up gradation of Neoprene and adhesive grades of Chloroprene rubber used in rubber based adhesives. POLYTONE AP 112 is also used in Tung Oil, Long oil, based alkyl insulating varnishes, auto primer varnishes and wire enamels.
Solubility
POLYTONE AP 112 is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon.
Packaging
Available in 25 Kg bags.
Shelf Life
Store under cool dry conditions. It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However, as use conditions are not within our control no guarantees are given or are to be inferred, nor is freedom from any patent to be inferred.
Product Price :Get Latest Price
Product Details:Chemical Classification | PTBP Formaldehyde Resin (Resole) |
Colour | Dark Violet |
Melting Point (Capillary) | 70 Degree C - 80 Degree C |
Softening Point (B & R) | 88 Degree C - 102 Degree C |
Methylol Content | 12-17 % |
Moisture Content | 0.5% Max |
Type | Heat Reactive/Adhesive Resin |
Physical Form | Broken Lumps |
Product Price :Get Latest Price
Product Details:Minimum Order Quantity | 100 Kg |
Packaging Size | 25 Kg |
Surface Of Application | Rubber |
Grade Standard | Industrial Grade |
Color | Yellow |
Type | PTBP |
Material Compatibility | Rubber |
Packaging Type | Bag |
Curing Method | Heat Activated Curing |
Classification | Thermosetting |
Additional Information:
Product Price :Get Latest Price
Product Details:Type | Heat Reactive/Adhesive Resin |
Physical Form | Broken Lumps |
Moisture Content | 0.5% Max |
Softening Point (B & R) | 110 Degree C - 120 Degree C |
Chemical Classification | PTBP Formaldehyde Resin (Resole) |
Colour | Pale YellowC |
Methylol Content | 10-14 % |
Application
POLYTONE AP 110 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
Use of POLYTONE AP 110 imparts good open time combined with excellent green tack and cohesive strength in rubber based adhesives. Use of AP 110 is also useful for increasing the storage stability and heat resistance of the adhesive.
Solubility
POLYTONE AP 110 is soluble in aromatic hydrocarbon solvents, chlorinated hydrocarbons, ketones and esters etc.
Packaging
Available in 25.00 Kg net HDPE lined Kraft Paper bags with inner paper liner-on pallets.
Shelf Life
Store under cool dry conditions. It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However , as use conditions are not within our control no guarantees are given or are to be inferred, nor is freedom from any patent to be inferred.
Product Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageProduct Price :Get Latest Price
Properties & UsageExplore More Products
© Polyols & Polymers Pvt.Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited